The Cat?� C0.5 Industrial Diesel Engine is offered in ratings ranging from 4.1-6.4 kW (5.5-8.6 hp) @ 2000-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 8.2-10.2 kW (11.0-13.7 hp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Industries and applications powered by C0.5 engines include: Auxiliary Power Units, Compactors/Rollers, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
Power Rating
- Maximum Power
- 13.7 HP
- Maximum Torque
- 22 lb-ft @ 2600 rpm
- Rated Speed
- 2,000-3,600 rpm
- Minimum Power
- 11 HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 2
- Bore
- 2.6 in
- Stroke
- 2.8 in
- Displacement
- 31 in³
- Compression Ratio
- 23.5:1
- Aspiration
- Naturally Aspirated (NA)
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
Engine Dimensions - Approximate
- Length
- 16 in
- Width
- 14.6 in
- Height
- 20.6 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 126 lb
Standard Equipment:
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
- Flywheel And Flywheel Housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 13.7 HP
- Maximum Torque
- 22 lb-ft @ 2600 rpm
- Rated Speed
- 2,000-3,600 rpm
- Minimum Power
- 11 HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 2
- Bore
- 2.6 in
- Stroke
- 2.8 in
- Displacement
- 31 in³
- Compression Ratio
- 23.5:1
- Aspiration
- Naturally Aspirated (NA)
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
Engine Dimensions - Approximate
- Length
- 16 in
- Width
- 14.6 in
- Height
- 20.6 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 126 lb
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
- Flywheel And Flywheel Housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment: