The Cat?� C9.3B industrial diesel engine is offered in ratings ranging from 250-340 kW (335-456 hp) @ 1800-2200 rpm. These ratings meet U.S. EPA Tier 4 Final, EU Stage V, China Nonroad (NR) Stage IV, Japan 2014, and Korea Stage V emission standards.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
%
Period
Leasing agreement amount
Payment type
Annuity
Monthly payment
/ month
Power Rating
- Maximum Power
- 456 HP
- Maximum Torque
- 1,540 lb-ft @ 1400 rpm
- Rated Speed
- 1,800-2,200 rpm
- Minimum Power
- 335 HP
Emission Standards
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2,014, China NRIV
General
- Engine Configuration
- In-Line 6
- Bore
- 4.5 in
- Stroke
- 5.9 in
- Displacement
- 567.5 in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF+SCR
Engine Dimensions - Approximate
- Length
- 44 in
- Width
- 31 in
- Height
- 42 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 1,907 lb
Aftertreatment Dimensions
- Length
- 36 in
- Width
- 27 in
- Height
- 17 in
- Weight
- 211 lb
Standard Equipment:
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
- Cooling System
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels And Flywheel Housing
- Available SAE 1 power take-off with optional SAE B, SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Proposed Stage V)
- Fuel System
- Electronic high pressure common rail
- Primary fuel filter
- Secondary and tertiary fuel filters
- Fuel transfer pump
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system)
- Power Take Off (pto)
- SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
- General
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
- Aftertreatment System
- Clean Emissions Module (CEM) consisting of Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and high-efficiency Selective Catalytic Reduction (SCR)
- Pump Electronic Control Unit (PETU)
- Available in 12V or 24V systems
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 456 HP
- Maximum Torque
- 1,540 lb-ft @ 1400 rpm
- Rated Speed
- 1,800-2,200 rpm
- Minimum Power
- 335 HP
Emission Standards
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2,014, China NRIV
General
- Engine Configuration
- In-Line 6
- Bore
- 4.5 in
- Stroke
- 5.9 in
- Displacement
- 567.5 in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF+SCR
Engine Dimensions - Approximate
- Length
- 44 in
- Width
- 31 in
- Height
- 42 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 1,907 lb
Aftertreatment Dimensions
- Length
- 36 in
- Width
- 27 in
- Height
- 17 in
- Weight
- 211 lb
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
- Cooling System
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels And Flywheel Housing
- Available SAE 1 power take-off with optional SAE B, SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Proposed Stage V)
- Fuel System
- Electronic high pressure common rail
- Primary fuel filter
- Secondary and tertiary fuel filters
- Fuel transfer pump
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system)
- Power Take Off (pto)
- SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
- General
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
- Aftertreatment System
- Clean Emissions Module (CEM) consisting of Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and high-efficiency Selective Catalytic Reduction (SCR)
- Pump Electronic Control Unit (PETU)
- Available in 12V or 24V systems
Optional Equipment: