The C7.1 marine propulsion engineis ideal for recreational boating applications, specifically smaller vessels and motoryachts ranging from 25 -60 feet in size. The engine features a common rail fuel system enabling optimum combustion and low emissions. The engines provide noticeably quiet operation due to reduced combustion noise through advanced electronic control. Additionally, no visible smoke is emitted from the C7.1 engines during operation.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
%
Period
Leasing agreement amount
Payment type
Annuity
Monthly payment
/ month
Ratings
- Power Range
- 400 bhp - 500 bhp (298 bkW - 373 bkW)
Engine Specifications
- Speed Range
- 2,900 rpm
- Emissions
- IMO II, U.S. EPA Tier 3, RCD II, China II
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 4.13 in
- Stroke
- 5.31 in
- Aspiration
- Turbocharged, aftercooled
- Displacement
- 428 in³
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
Dimensions & Weights
- Width - Engine
- 31.4 in
- Height
- 34.5 in
- Engine Dry Weight - Approximate
- 1,676 lb
- Length - Engine
- 43.1 in
Standard Equipment:
- Standard Equipment
- Water cooled turbocharger and exhaust manifold
- Common rail fuel system
- Corrosion resistant sea water aftercooler
- Closed crankcase ventilation system
- Starter motors - 12V or 24V
- Fuel cooler
- Integral engine oil cooler
- Vibration damper and guard
- Electric fuel priming pump
- Self-tensioning multi-vee alternator drive belt
- Gear driven sea water pump (rubber impeller)
- Fin and tube type jacket water heat exchanger
- Front and rear engine mounting brackets
Optional Equipment:
- Optional Attachements
- Alternators - 24V 140 amp - 12V 175 amp
- Transmission gear oil cooler (engine mounted)
- Instrument Panels
- Glow plugs
- Jacket water heater
- 6" water cooled exhaust elbow
- Isolation mounts
- Primary fuel filter/water separator (remote mount)
- Selection of factory-fitted marine transmissions and oil hoses
- Cabin heater (calorifier) connections
- Triple groove PTO pulley (crankshaft mounted)
- Flexible fuel hoses
- Right-hand and high level left hand oil dipsticks
Specifications
Ratings
- Power Range
- 400 bhp - 500 bhp (298 bkW - 373 bkW)
Engine Specifications
- Speed Range
- 2,900 rpm
- Emissions
- IMO II, U.S. EPA Tier 3, RCD II, China II
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 4.13 in
- Stroke
- 5.31 in
- Aspiration
- Turbocharged, aftercooled
- Displacement
- 428 in³
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
Dimensions & Weights
- Width - Engine
- 31.4 in
- Height
- 34.5 in
- Engine Dry Weight - Approximate
- 1,676 lb
- Length - Engine
- 43.1 in
Standard/Optional Features
Standard Equipment:
- Standard Equipment
- Water cooled turbocharger and exhaust manifold
- Common rail fuel system
- Corrosion resistant sea water aftercooler
- Closed crankcase ventilation system
- Starter motors - 12V or 24V
- Fuel cooler
- Integral engine oil cooler
- Vibration damper and guard
- Electric fuel priming pump
- Self-tensioning multi-vee alternator drive belt
- Gear driven sea water pump (rubber impeller)
- Fin and tube type jacket water heat exchanger
- Front and rear engine mounting brackets
Optional Equipment:
- Optional Attachements
- Alternators - 24V 140 amp - 12V 175 amp
- Transmission gear oil cooler (engine mounted)
- Instrument Panels
- Glow plugs
- Jacket water heater
- 6" water cooled exhaust elbow
- Isolation mounts
- Primary fuel filter/water separator (remote mount)
- Selection of factory-fitted marine transmissions and oil hoses
- Cabin heater (calorifier) connections
- Triple groove PTO pulley (crankshaft mounted)
- Flexible fuel hoses
- Right-hand and high level left hand oil dipsticks