Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
%
Period
Leasing agreement amount
Payment type
Annuity
Monthly payment
/ month
Generator Set Specifications
- Minimum Rating
- 219 ekW
- Maximum Rating
- 940 ekW
- Frequency
- 60hz
Engine Specifications
- Configuration
- Vee-12, 4-stroke-Cycle-Diesel
- Aspiration
- Turbocharged-aftercooled aspiration
- Bore
- 5.71 in
- Stroke
- 6.38 in
- Displacement
- 1,959 in³
- Emissions
- U.S. EPA Tier 3 / IMO II emissions certified
- Oil Change Interval
- 750 hrs
- Cooling
- Heat exchanger, keel or radiator cooled
- Refill Capacity
- Lube Oil System w/ oil filter change: 146 L (38.5 gal)
- Generator
- SR5 - Form Wound
- Governor
- Electronic (A4 ECM)
- Rated Engine Speed
- 1,800 rpm
Generator Set Dimensions
- Length
- 167.2 in/4,245 mm (minimum), 226.1 in/5,742 mm (maximum)
- Width
- 59.9 in/1,521 mm (minimum), 89.8 in/2,280 mm (maximum)
- Height
- 70.4 in/1,747 mm (minimum), 92.8 in/2,356 mm (maximum)
- Package Dry Weight
- 15,721 lb/7,131 kg (minimum), 21,998 lb/9,978 kg (maximum)
Standard Equipment:
- Air Inlet System
- Separate circuit aftercooled (SCAC)
- Control System
- 24V control system
- Cooling System
- Heat exchanger, keel or radiator cooled
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
- Fuel System
- Duplex fuel filters with hybrid fuel lines
- Fuel transfer and priming pump
- Generators And Generator Attachments
- IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
- Lube System
- Oil fill, simplex filter and dipstick
- Mounting System
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
- General
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment:
- Air Inlet System
- Closed crankcase ventilation
- Alarm And Protection
- MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
- IP44 generator protection
- Exhaust System
- Muffler
- SOLAS approved spray shielding
- Charging System
- Charging alternator
- Control System
- EMCP 4.2 control panel
- Fuel System
- Installed primary fuel filter with water separator and manual or electric priming pump
- Fuel cooler
- Lube System
- Duplex oil filters
- Starting System
- Starting motors – air, electric or dual
Specifications
Generator Set Specifications
- Minimum Rating
- 219 ekW
- Maximum Rating
- 940 ekW
- Frequency
- 60hz
Engine Specifications
- Configuration
- Vee-12, 4-stroke-Cycle-Diesel
- Aspiration
- Turbocharged-aftercooled aspiration
- Bore
- 5.71 in
- Stroke
- 6.38 in
- Displacement
- 1,959 in³
- Emissions
- U.S. EPA Tier 3 / IMO II emissions certified
- Oil Change Interval
- 750 hrs
- Cooling
- Heat exchanger, keel or radiator cooled
- Refill Capacity
- Lube Oil System w/ oil filter change: 146 L (38.5 gal)
- Generator
- SR5 - Form Wound
- Governor
- Electronic (A4 ECM)
- Rated Engine Speed
- 1,800 rpm
Generator Set Dimensions
- Length
- 167.2 in/4,245 mm (minimum), 226.1 in/5,742 mm (maximum)
- Width
- 59.9 in/1,521 mm (minimum), 89.8 in/2,280 mm (maximum)
- Height
- 70.4 in/1,747 mm (minimum), 92.8 in/2,356 mm (maximum)
- Package Dry Weight
- 15,721 lb/7,131 kg (minimum), 21,998 lb/9,978 kg (maximum)
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Separate circuit aftercooled (SCAC)
- Control System
- 24V control system
- Cooling System
- Heat exchanger, keel or radiator cooled
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
- Fuel System
- Duplex fuel filters with hybrid fuel lines
- Fuel transfer and priming pump
- Generators And Generator Attachments
- IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
- Lube System
- Oil fill, simplex filter and dipstick
- Mounting System
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
- General
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment:
- Air Inlet System
- Closed crankcase ventilation
- Alarm And Protection
- MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
- IP44 generator protection
- Exhaust System
- Muffler
- SOLAS approved spray shielding
- Charging System
- Charging alternator
- Control System
- EMCP 4.2 control panel
- Fuel System
- Installed primary fuel filter with water separator and manual or electric priming pump
- Fuel cooler
- Lube System
- Duplex oil filters
- Starting System
- Starting motors – air, electric or dual