The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
%
Period
Leasing agreement amount
Payment type
Annuity
Monthly payment
/ month
Operating Specifications
- Rated Load Capacity
- 6,500 lb
- Maximum Lift Height
- 42 ft
- Maximum Forward Reach
- 30 ft
- Top Travel Speed
- 19 mile/h
- Capacity at Maximum Reach
- 700 lb
- Drawbar Pull - Loaded
- 20,670 lbf
- Turning Radius - Over Tires
- 12 ft
- Frame Leveling
- 10°
- Capacity at Maximum Height
- 6,500 lb
Engine
- Engine Model
- Cat® C3.6L
- Gross Power - Basic
- 73.7 hp
- Note
- Meets U.S. EPA Tier 4 Final emission standards.
Weights
- Operating Weight
- 22,002 lb
Dimensions
- Height
- 8 ft
- Width
- 8 ft
- Wheel Base
- 11.25 ft
- Length - Fork Face
- 18.5 ft
- Ground Clearance
- 17 in
- Turning Radius - Over Tires
- 12 ft
Tires
- Standard
- 370/75-28 Duraforce Air
- Optional (1)
- 370/75-28 Duraforce Foam Fill
- Optional (2)
- 315/95-28 Telemaster Solid
- Optional (3)
- 13.00-24 16PR Air
- Optional (4)
- 13.00-24 12PR Foam
- Optional (5)
- 370/75-28 Non-Marking Air
- Optional
- 370/75-28 Non-Marking Foam
Service Refill Capacities
- Fuel Tank
- 38.3 gal (US)
- Hydraulic System
- 42 gal (US)
Boom Performance
- Boom Up
- 15 s
- Boom Down
- 10.3 s
- Tele In
- 9.5 s
- Tele Out
- 16.3 s
Work Tools
- Pallet Forks - Option 2
- [2] 1,220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
- Pallet Forks - Option 3
- [2] 1,829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
- Pallet Forks - Option 1
- [2] 1,220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
- Cubing Forks
- [2] 1,220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
- Carriages - Standard Tilt
- 50 in
- Carriages - Side Shift
- 50 in
- Carriages - Swing
- 100°, 1,829 mm, 2,948 kg Capacity, 2,268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
- Lumber Forks - Option 1
- [2] 1,525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
- Carriages - Dual Fork Positioning
- 50 in
Axles
- Type (1)
- Trunnion mounted planetary 55 degree steer axles.
- Type (2)
- High bias limited slip differential on front axle.
Transmission Speeds
- Forward
- 4 speed
- Reverse
- 3 speed
Hydraulic System
- Auxiliary Hydraulic Flow
- 18 gal/min
- Auxiliary Hydraulic Pressure
- 3,481 psi
- Gear Pump
- Single-section
Braking System
- Service Brakes
- Inboard wet disc brakes on front and rear axles
- Parking Brakes
- Wet disc, spring applied hydraulic release on front axle
Standard Equipment:
- Telescopic Boom
- Boom angle indicator
- Electrical
- Alternator, 60 amp, 12 volt
- Battery, 12 volt, 1000 CCA
- Horn
- Alarm, backup
- Operator Station
- Canopy, ROPS/FOPS
- Joystick, single electronic
- Adjustable joystick wristrest
- Low step, grab bars for easy entry
- Seat - vinyl, suspension with Cat logo
- Steering wheel spinner knob
- Floor mat - heavy duty
- Left side rear view mirror
- Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
- Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
- Park Brake with indicator light
- Steering Wheel with Cat logo
- Cat keys and locks
- Brakes - wet disc service
- Power Train
- Engine,Cat® C3.6L (73.7 hp)
- Thermal starting aid
- Transmission, 4-speed forward, 3-speed reverse
- Cat filters, hoses and couplings
- Axles - Dana
- Steering - 4 wheel
- Parking brake with indicator light
- Drive - 4 wheel
- Structure
- Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
- Cat IT Coupler
- Anti-freeze
- Coolant - Anti-freeze, 50/50 Mix
- Tires
- Tires - 370/75-28 Duraforce Air
- Other Equipment
- Integrated lift and tie down points
- Standard Cat color paint
- Auxillary hydraulics for auxillary attachments (one function)
Optional Equipment:
- Telescopic Boom
- Hydraulic IT Coupler (includes Auxiliary Electrics)
- Electrical
- Work Light Group: 2 Cab mounted headlights -- 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon
- Engine heater block
- Heater - open cab
- Road Light Group -- Headlights, Brake Lights, Turn Signals
- Operator Station
- Air conditioning
- Auxiliary hydraulics for Hydraulic Work Tools (one function)
- Single Joystick - with Rocker Switch
- EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
- Skylight Wiper
- Brick Guard - Top and front.
- Tires
- Tires - 13.00-24 12PR Foam
- Tires - 13.00-24 16PR Air
- Tires - 370/75-28 Duraforce Foam Fill
- Tires - 370/75-28 Non-Marking Air
- Tires - 315/95-28 Telemaster Solid
- Other Equipment
- Fenders
- Tow Hook - Pintle Type
- Instant Hook - 4000 lb capacity, boom head mounted winch
- Outriggers
- Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater.
- Work Tools
- Access Work Platform - 8 ft x 4 ft; 1,000 maximum capacity (available from factory)
- Carriage - side shift, 50 in. (available from factory)
- Lifting Hook - fork mounted (available from factory)
- Truss Broom
- Carriage - standard tilt, 50 in. (available from factory)
- Carriage - wide tilt, 72 in. (available from factory)
- Carriage - standard rotate, 50 in. (available from factory)
- Carriage - swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory)
- Pallet Forks - two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory)
- Pallet Forks - two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory)
- Cubing Forks - two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory)
- Bucket - General Purpose 1.3 Cu. Yd.
- Bucket - Material Handling 1.95 Cu. Yd.
- Bucket - Multi-Purpose, 1.3 Cu. Yd.
Specifications
Operating Specifications
- Rated Load Capacity
- 6,500 lb
- Maximum Lift Height
- 42 ft
- Maximum Forward Reach
- 30 ft
- Top Travel Speed
- 19 mile/h
- Capacity at Maximum Reach
- 700 lb
- Drawbar Pull - Loaded
- 20,670 lbf
- Turning Radius - Over Tires
- 12 ft
- Frame Leveling
- 10°
- Capacity at Maximum Height
- 6,500 lb
Engine
- Engine Model
- Cat® C3.6L
- Gross Power - Basic
- 73.7 hp
- Note
- Meets U.S. EPA Tier 4 Final emission standards.
Weights
- Operating Weight
- 22,002 lb
Dimensions
- Height
- 8 ft
- Width
- 8 ft
- Wheel Base
- 11.25 ft
- Length - Fork Face
- 18.5 ft
- Ground Clearance
- 17 in
- Turning Radius - Over Tires
- 12 ft
Tires
- Standard
- 370/75-28 Duraforce Air
- Optional (1)
- 370/75-28 Duraforce Foam Fill
- Optional (2)
- 315/95-28 Telemaster Solid
- Optional (3)
- 13.00-24 16PR Air
- Optional (4)
- 13.00-24 12PR Foam
- Optional (5)
- 370/75-28 Non-Marking Air
- Optional
- 370/75-28 Non-Marking Foam
Service Refill Capacities
- Fuel Tank
- 38.3 gal (US)
- Hydraulic System
- 42 gal (US)
Boom Performance
- Boom Up
- 15 s
- Boom Down
- 10.3 s
- Tele In
- 9.5 s
- Tele Out
- 16.3 s
Work Tools
- Pallet Forks - Option 2
- [2] 1,220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
- Pallet Forks - Option 3
- [2] 1,829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
- Pallet Forks - Option 1
- [2] 1,220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
- Cubing Forks
- [2] 1,220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
- Carriages - Standard Tilt
- 50 in
- Carriages - Side Shift
- 50 in
- Carriages - Swing
- 100°, 1,829 mm, 2,948 kg Capacity, 2,268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
- Lumber Forks - Option 1
- [2] 1,525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
- Carriages - Dual Fork Positioning
- 50 in
Axles
- Type (1)
- Trunnion mounted planetary 55 degree steer axles.
- Type (2)
- High bias limited slip differential on front axle.
Transmission Speeds
- Forward
- 4 speed
- Reverse
- 3 speed
Hydraulic System
- Auxiliary Hydraulic Flow
- 18 gal/min
- Auxiliary Hydraulic Pressure
- 3,481 psi
- Gear Pump
- Single-section
Braking System
- Service Brakes
- Inboard wet disc brakes on front and rear axles
- Parking Brakes
- Wet disc, spring applied hydraulic release on front axle
Standard/Optional Features
Standard Equipment:
- Telescopic Boom
- Boom angle indicator
- Electrical
- Alternator, 60 amp, 12 volt
- Battery, 12 volt, 1000 CCA
- Horn
- Alarm, backup
- Operator Station
- Canopy, ROPS/FOPS
- Joystick, single electronic
- Adjustable joystick wristrest
- Low step, grab bars for easy entry
- Seat - vinyl, suspension with Cat logo
- Steering wheel spinner knob
- Floor mat - heavy duty
- Left side rear view mirror
- Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
- Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
- Park Brake with indicator light
- Steering Wheel with Cat logo
- Cat keys and locks
- Brakes - wet disc service
- Power Train
- Engine,Cat® C3.6L (73.7 hp)
- Thermal starting aid
- Transmission, 4-speed forward, 3-speed reverse
- Cat filters, hoses and couplings
- Axles - Dana
- Steering - 4 wheel
- Parking brake with indicator light
- Drive - 4 wheel
- Structure
- Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
- Cat IT Coupler
- Anti-freeze
- Coolant - Anti-freeze, 50/50 Mix
- Tires
- Tires - 370/75-28 Duraforce Air
- Other Equipment
- Integrated lift and tie down points
- Standard Cat color paint
- Auxillary hydraulics for auxillary attachments (one function)
Optional Equipment:
- Telescopic Boom
- Hydraulic IT Coupler (includes Auxiliary Electrics)
- Electrical
- Work Light Group: 2 Cab mounted headlights -- 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon
- Engine heater block
- Heater - open cab
- Road Light Group -- Headlights, Brake Lights, Turn Signals
- Operator Station
- Air conditioning
- Auxiliary hydraulics for Hydraulic Work Tools (one function)
- Single Joystick - with Rocker Switch
- EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
- Skylight Wiper
- Brick Guard - Top and front.
- Tires
- Tires - 13.00-24 12PR Foam
- Tires - 13.00-24 16PR Air
- Tires - 370/75-28 Duraforce Foam Fill
- Tires - 370/75-28 Non-Marking Air
- Tires - 315/95-28 Telemaster Solid
- Other Equipment
- Fenders
- Tow Hook - Pintle Type
- Instant Hook - 4000 lb capacity, boom head mounted winch
- Outriggers
- Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater.
- Work Tools
- Access Work Platform - 8 ft x 4 ft; 1,000 maximum capacity (available from factory)
- Carriage - side shift, 50 in. (available from factory)
- Lifting Hook - fork mounted (available from factory)
- Truss Broom
- Carriage - standard tilt, 50 in. (available from factory)
- Carriage - wide tilt, 72 in. (available from factory)
- Carriage - standard rotate, 50 in. (available from factory)
- Carriage - swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory)
- Pallet Forks - two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory)
- Pallet Forks - two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory)
- Cubing Forks - two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory)
- Bucket - General Purpose 1.3 Cu. Yd.
- Bucket - Material Handling 1.95 Cu. Yd.
- Bucket - Multi-Purpose, 1.3 Cu. Yd.