The Cat?� C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
Power Rating
- Maximum Power
- 134 HP
- Maximum Torque
- 406 lb-ft @ 1500 rpm
- Rated Speed
- 2,000-2,400 rpm
- Minimum Power
- 74 HP
Emission Standards
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 4
- Bore
- 3.9 in
- Stroke
- 4.7 in
- Displacement
- 220 in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF or DOC+DPF+SCR
Engine Dimensions - Approximate
- Length
- 26.3 in
- Width
- 22.2 in
- Height
- 31 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 840 lb
Standard Equipment:
- Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
- Flywheels And Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
- Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
- Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
- General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
- U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- SCR Auxiliaries
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 134 HP
- Maximum Torque
- 406 lb-ft @ 1500 rpm
- Rated Speed
- 2,000-2,400 rpm
- Minimum Power
- 74 HP
Emission Standards
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 4
- Bore
- 3.9 in
- Stroke
- 4.7 in
- Displacement
- 220 in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF or DOC+DPF+SCR
Engine Dimensions - Approximate
- Length
- 26.3 in
- Width
- 22.2 in
- Height
- 31 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 840 lb
Standard/Optional Features
Standard Equipment:
- Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
- Flywheels And Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
- Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
- Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
- General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
- U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- SCR Auxiliaries
Optional Equipment: