The Cat?� C9.3B IPU configuration not only provides the flexibility andoptions found on a standard industrial engine, but also comes fittedwith air filter and mounting, an integrated cooling system with airand coolant lines, and full wire harnessing with an engine-mountedECM
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
%
Period
Leasing agreement amount
Payment type
Annuity
Monthly payment
/ month
Power Rating
- Maximum Power
- 416 HP
- Rated Speed
- 1,800-2,200 rpm
- Minimum Power
- 308 HP
Emission Standards
- Emissions
- Brazil MAR-1, UN R96 Stage IIIA
General
- Engine Configuration
- Inline 6, 4-Stroke-Cycle-Diesel
- Bore
- 4.5 in
- Stroke
- 5.9 in
- Displacement
- 567.5 in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Rotation from Flywheel End
- Counterclockwise
Power Unit Dimensions
- Length
- 83 in
- Width
- 43 in
- Height
- 63 in
- Weight
- 3,265 lb
Standard Equipment:
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
- Cooling System
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels And Flywheel Housing
- Dual rear PTO configuration
- Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments.
- Fuel System
- Electronic high pressure common rail
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
- Lube System
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Power Take Off (pto)
- SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
- General
- Vibration damper
- Lifting eyes
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 416 HP
- Rated Speed
- 1,800-2,200 rpm
- Minimum Power
- 308 HP
Emission Standards
- Emissions
- Brazil MAR-1, UN R96 Stage IIIA
General
- Engine Configuration
- Inline 6, 4-Stroke-Cycle-Diesel
- Bore
- 4.5 in
- Stroke
- 5.9 in
- Displacement
- 567.5 in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Rotation from Flywheel End
- Counterclockwise
Power Unit Dimensions
- Length
- 83 in
- Width
- 43 in
- Height
- 63 in
- Weight
- 3,265 lb
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
- Cooling System
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels And Flywheel Housing
- Dual rear PTO configuration
- Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments.
- Fuel System
- Electronic high pressure common rail
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
- Lube System
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Power Take Off (pto)
- SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
- General
- Vibration damper
- Lifting eyes
Optional Equipment: