Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
%
Period
Leasing agreement amount
Payment type
Annuity
Monthly payment
/ month
Generator Set Specifications
- Maximum Rating
- 4,840 ekW (60Hz), 6,500 kVA (50Hz)
- Minimum Rating
- 4,400 ekW (60Hz), 5,875 kVA (50Hz)
- Emissions/Fuel Strategy
- EPA Tier 4 Final, IMO Tier 2
- Frequency
- 50 / 60 Hz
- Speed
- 900 / 1,000 rpm
- Duty Cycle
- Prime, Continuous
Engine Specifications
- Engine Model
- C280-16, V-16,4-Stroke Water-Cooled Diesel
- Bore
- 11 in
- Stroke
- 11.8 in
- Displacement
- 18,032 in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404 in
- Width - Maximum
- 99.62 in
- Height - Maximum
- 156.6 in
- Dry Weight - Genset (maximum)
- 141,840 lb
Standard Equipment:
- Air Inlet System
- Air inlet shutoff
- Turbocharger, watercooled, engine oil lubricated
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air cleaner
- Cooling System
- Three-bundle oil cooler
- Jacket water thermostats
- Front Mounted turbos
- Engine coolant water drains
- Water temperature regulator
- Exhaust System
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
- Fuel System
- Simplex or duplex
- Generator System
- Custom generator per generator data sheet completed by dealer
- Governor System
- UG Actuator
- Lube System
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Oil filler and dipstick
- Service Side Engine mounted on Cylinder Block Inspection Covers
- Crankcase explosion relief valves
- Oil pressure regulating valve
- Mounting System
- Damper, torsional vibration
- Engine and generator mounting
- Starting / Charging System
- Line group for single point custom connection
- Two Motors, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
- General:
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment:
- Air Inlet System
- Air inlet adapter
- Vertical support bracket
- Air cleaner louver assembly
- Boost control valve
- Soot filter
- Heavy duty air cleaner
- Cooling System
- Auxiliary water pump
- Heat exchanger for single circuit
- Expansion tank
- Cooling system aids
- Heating aids
- Exhaust System
- Flexible exhaust Fittings
- Weld flange and related hardware
- Fuel System
- Duplex primary fuel strainer
- Fuel system connections
- Fuel priming pump
- Generator System
- Winding temperature detectors
- Anti-condensation space heaters
- 3 Phase, Six Leads, WYE
- Class F insulation
- Busbar connections
- Governor System
- Electronic/actuators
- EGB actuator
- Digital programmers
- Battery backup/power supply
- 230 UA
- 723 Plus
- Lube System
- Oil pan drain valve
- Lube ANSI Adapter (Emergency connection)
- Mounting System
- Spring type vibration isolators
- Vertically Restrained
- Non-vertically Restrained
- Isolator
- Starting / Charging System
- Compressed air flex hose
- Turbine type air starters
- Pressure reducing valve
- Redundant air starters
- General:
- Custom paint colors
Specifications
Generator Set Specifications
- Maximum Rating
- 4,840 ekW (60Hz), 6,500 kVA (50Hz)
- Minimum Rating
- 4,400 ekW (60Hz), 5,875 kVA (50Hz)
- Emissions/Fuel Strategy
- EPA Tier 4 Final, IMO Tier 2
- Frequency
- 50 / 60 Hz
- Speed
- 900 / 1,000 rpm
- Duty Cycle
- Prime, Continuous
Engine Specifications
- Engine Model
- C280-16, V-16,4-Stroke Water-Cooled Diesel
- Bore
- 11 in
- Stroke
- 11.8 in
- Displacement
- 18,032 in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404 in
- Width - Maximum
- 99.62 in
- Height - Maximum
- 156.6 in
- Dry Weight - Genset (maximum)
- 141,840 lb
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Air inlet shutoff
- Turbocharger, watercooled, engine oil lubricated
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air cleaner
- Cooling System
- Three-bundle oil cooler
- Jacket water thermostats
- Front Mounted turbos
- Engine coolant water drains
- Water temperature regulator
- Exhaust System
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
- Fuel System
- Simplex or duplex
- Generator System
- Custom generator per generator data sheet completed by dealer
- Governor System
- UG Actuator
- Lube System
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Oil filler and dipstick
- Service Side Engine mounted on Cylinder Block Inspection Covers
- Crankcase explosion relief valves
- Oil pressure regulating valve
- Mounting System
- Damper, torsional vibration
- Engine and generator mounting
- Starting / Charging System
- Line group for single point custom connection
- Two Motors, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
- General:
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment:
- Air Inlet System
- Air inlet adapter
- Vertical support bracket
- Air cleaner louver assembly
- Boost control valve
- Soot filter
- Heavy duty air cleaner
- Cooling System
- Auxiliary water pump
- Heat exchanger for single circuit
- Expansion tank
- Cooling system aids
- Heating aids
- Exhaust System
- Flexible exhaust Fittings
- Weld flange and related hardware
- Fuel System
- Duplex primary fuel strainer
- Fuel system connections
- Fuel priming pump
- Generator System
- Winding temperature detectors
- Anti-condensation space heaters
- 3 Phase, Six Leads, WYE
- Class F insulation
- Busbar connections
- Governor System
- Electronic/actuators
- EGB actuator
- Digital programmers
- Battery backup/power supply
- 230 UA
- 723 Plus
- Lube System
- Oil pan drain valve
- Lube ANSI Adapter (Emergency connection)
- Mounting System
- Spring type vibration isolators
- Vertically Restrained
- Non-vertically Restrained
- Isolator
- Starting / Charging System
- Compressed air flex hose
- Turbine type air starters
- Pressure reducing valve
- Redundant air starters
- General:
- Custom paint colors