The Cat® C2.8 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 55 bkW (74 bhp) @ 2500 rpm. The C2.8 is designed to meet the needs of many industries and applications, including agricultural tractors, aerial lifts, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
Power Rating
- Maximum Power
- 74 HP
- Maximum Torque
- 280 lb-ft @ 1360 rpm
- Rated Speed
- 2,200 - 2,400 rpm
- Minimum Power
- 67 HP
Emission Standards
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 4
- Bore
- 3.5 in
- Stroke
- 4.3 in
- Displacement
- 171 in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged (T) and Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF
Engine Dimensions - Approximate
- Length
- 24.9 in
- Width
- 22.4 in
- Height
- 30.9 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 750 lb
Standard Equipment:
- Air Inlet System
- Induction manifolds
- Exhaust manifolds
- Engine-mounted aftertreatment
- Control System
- Starter motor (12V)
- Alternator (12V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
- Flywheels And Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
- Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
- Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
- General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
- U.s. Epa Tier 4 Final, Proposed Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC) (Tier 4 Final and Stage V)
- Diesel Particulate Filter (DPF) (Stage V)
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 74 HP
- Maximum Torque
- 280 lb-ft @ 1360 rpm
- Rated Speed
- 2,200 - 2,400 rpm
- Minimum Power
- 67 HP
Emission Standards
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 4
- Bore
- 3.5 in
- Stroke
- 4.3 in
- Displacement
- 171 in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged (T) and Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF
Engine Dimensions - Approximate
- Length
- 24.9 in
- Width
- 22.4 in
- Height
- 30.9 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 750 lb
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Induction manifolds
- Exhaust manifolds
- Engine-mounted aftertreatment
- Control System
- Starter motor (12V)
- Alternator (12V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
- Flywheels And Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
- Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
- Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
- General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
- U.s. Epa Tier 4 Final, Proposed Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC) (Tier 4 Final and Stage V)
- Diesel Particulate Filter (DPF) (Stage V)
Optional Equipment: